|
|
 |
|
|
Introduction:
The Fiber Tester is a small hand-held tool for verifying and troubleshooting and quickly diagnose problems during Fiber cable installation.
Features:
﹒Power saving automatically
﹒Power on ang Battery low indicator
﹒Operation is the easiest
﹒Cost-effective is the most
Specifications
﹒Light wave Wavelength:1300nm
﹒Fiber core:62.5/125μm
﹒Power range:-20dBm～-40dBm
﹒Power:6F22(9V)×1
﹒Size:112×62×23mm
﹒Weigh:receiver 95g(include battery)
﹒Emitter 92g(include battery) |
|
Introduction:
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation. For telephone line, it can identify some states in the line, and more convenient to install, debug, maintain telephone line. |
Features:
· Judge continuity of the cables or wires.
· Track the cables or wires, and diagnose and break point.
· Receive the tone signal on the cables or wires (telephone line).
· Identify the state in the working telephone line (clear, ring, busy).
· Send a single solid tone or a dual alternating tone to the object cables or wires.
|
Specifications:
· Send tone frequency: 1.5kHz
· Receive frequency range: 100~300KHz
· Power: 6F22 (9V) x 1
· Size: Receiver 238x43x26mm; Emitter 145x35x25mm
· Wight: Receiver 106g (including battery); Emitter 114g (including battery) |
|
